SAFE OPERATING PROCEDURES
1. DO NOT look into the laser beam and DO NOT unnecessarily aim at other persons.
2. DO NOT open the unit. Doing so, will void the warranty and requires the unit to be returned to Tara Manufacturing for
recalibration.
3. No user serviceable parts inside.
4. As this is a precision instrument, it should be transported and carried in its case and handled with care at all times.
5. DO NOT immerse the device in water or other fluids.
6. Wipe off dirt and smudges with a damp tissue or soft, clean, lint-free cotton cloth.
7. DO NOT use aggressive cleaning agents or solutions.
8. Whenever possible, store the device in a dry, shady location.
USE
1. Measuring Conditions
(a) The optimal measuring condition is in the morning or evening and if the walls
of the pool are in shadow.
(b) Measuring errors can occur when the target surface reflects too intensely
(e.g. a mirror) or insufficiently (e.g. black fabric), or the ambient light is too bright.
2. Device Preparation
(a) Charge Laser before use.
(b) Attach Laser to tripod and place near the center of the pool.
(c) Try to locate a spot where the laser will be as perpendicular as possible to all the
walls of the pool. Ex.1
(d) Verify all sides of the pool wall are visible from the laser location.
(e) Using a bubble level on the top of the laser unit adjust the tripod so that the laser
device is level.
(f) Laser can experience interference from reflections on the walls of the pool.
It is best to use the laser when the sun is low or the sky is overcast.
USER GUIDE
Laser Device
Charging Port:
» Use only the charger
provided with unit
DEVICE CONTROLS
Ex.1
In this example the device should be set back
from the exact center, to capture the inside
radius of the kidney.
Tara Liners & Safety Covers • 256-725-2500 • www.taraliners.com/laser
Good
Good
Poor
Poor
Power Switch:
» On: Illuminated
» Off: Dark
