Tar River BWC Series, Руководство оператора

Страница: 14 / 68

14
BWC Hydraulic Feed Wood Chipper
PTO Driveline Instructions
Instructions for Shortening a PTO Driveline:
Note : If you are not confident modifying the PTO Driveline, you should contact a Qualified
Professional.

Separate the inner and outer PTO Drivelines. Leave separated at this time.

Attach the outer PTO Driveline to the tractor implement input shaft and inner PTO driveline to the
implement input shaft.

With the drivelines parallel to one another, measure 1” (dim. ‘ B ’ ) back from the outer PTO Driveline
shield (see fig. 2) and make a mark on the inner PTO Driveline.

Measure 1” (dim ‘ B ’ ) back from the inner PTO Driveline shield (see fig. 2) and make a mark on the
outer PTO Driveline.

Remove the drivelines from the tractor and implement.

Measure from the end of the inner shield to the scribed mark (dim. “ C ”). Cut the inner shield at that
mark. Cut the same amount off the inner shaft (dim. “ C1 ” ).

Measure from the end of the outer shield to the scribed mark (dim. “ D ” ). Cut the outer shield at that
mark. Cut the same amount off the inner shaft (dim. “ D1 ” ).

Clean off all burrs from both drivelines.

Refer to “ Checking PTO Driveline Extended Length ” section next.