WSPR Without Tears
3. Ethernet cable.
4. WiFi USB dongle. You only need this if you're using an Pi 2.0 and you want to use WiFi. WiFi
is built into the Pi 3.0.
5. SD card (4 GB min, grade 10)
6. SD card reader (micro SD card to USB)
7. antenna (mate to BNC connector on WWoT)
Programming an SD Card
Setup
1. You need an SD Card; at least 4GB, 8GB is better. Class 10.
2. SD Card reader/writer. We've got a Targus Micro SD/T-F. It doesn't really matter what card
reader/writer you use. It connects your SD card to a USB port.
1. Win32DiskImager – It's a freebee. Download it from:
tapr.org/kits_WsprWithoutTears
or
sourceforge.net/projects/win32diskimager/.
2. Install Win32DiskImager.
3. Disk Image – Download it from:
tapr.org/kits_WsprWithoutTears
(file
WSPR_Baseline_********* where the *'s are a date. This is a big file (e.g. 500+ meg).
4. Unzip the file after it's finished downloading (it will take a while).
Program SD Card
1. Plug the SD Card reader/writer into a USB port.
2. Plug the SD Card into the reader/writer.
Figure 1: Win32DiskImager
TAPR (c) 2018-2019 “WSPR Without Tears” 4 Of 20 Version 2.1 05/20/2019
