CLOCK
Use to set the time of day or recall the time of day.
The time of day will be displayed at all times except
when the oven is operating. In the event of a power
failure or if the oven is unplugged, the clock will have
to be reset.
CLEAR
Touch to cancel the selected power level, cook or
defrost times that previously programmed. But the
time of day clock cannot be cancelled.
MEMORY
When programming the oven to cook by time, use the
MEMORY pad when setting both the 1
st
and 2
nd
cooking stage. The respective lights will come on to
indicate which stage the oven is operating in.
START
Touch to start the cooking or defrosting programs.
The cooking indicator light and the oven light will turn
on and the cooling fan will operate.
OPERATION INSTRUCTIONS
BEEPS DURING OVEN SETTINGS
Each time a pad is touched, a beep will sound to
acknowledge the touch.
SETTING THE CLOCK
1. Touch CLOCK pad.
2. Touch CLEAR pad.
3. Use the number pads to enter the
correct time. You must touch at least
three numbers to set the clock (one for
hour and two for minutes).
4. Touch CLOCK pad again.
NOTE:
This is a 12 hour clock. When the oven is
first plugged in, “1:01” should have appeared in
the display. To reset the time of day, repeat the
steps given above. You can check the clock time
while cooking is in progress by touching the
CLOCK pad.
SETTING THE OVEN TIMER
1. Touch TIME pad.
2. Enter the amount of time you want to count
down by touching the number pads. Digit time
is in minutes and seconds and set left to right.
Set one digit (a 5 for 5 seconds) or up to four
digits (2405 for 24 minutes, 5 seconds).
3. Touch POWER pad.
4. Touch number pad 0
5. Touch START pad.
NOTE:
Touch TIME and then touch CLEAR
to cancel TIME during timing process.
10
