TapFlo CTX I, Руководство пользователя

Страница: 5 / 39

0. GENERAL
IOM manual CTX centrifugal pumps
5
0. GENERAL
0.1. Introduction
The CTX pumps are open impeller single stage centrifugal pumps. They are manufactured
in high finish and mechanical strong material stainless steel AISI 304/316L. The pump range
meets the demands from a variety of today’s industr ies.
The industrial series CTX I is designed with sand blasted pump casing. A variety of
connection types, mechanical seal options and other executions are available to satisfy
most type of industrial duties.
The hygienic series CTX H is supplied with electro polished internals. This series is specially
dedicated for hygienic duties in food, beverage and pharmaceutical industries, where clean-
and drain-ability are important factors.
With proper attention to maintenance, CTX pumps will give efficient and trouble free
operation. This instruction manual will familiarise operators with detailed information about
installing, operating and maintaining the pump.
0.2. Warning symbols
The following warning symbols are present in this instruction manual. This is what they say:
This symbol stands next to all safety instructions in this instruction manual
where danger to life and limb may occur. Observe these instructions and
proceed with utmost caution in these situations. Inform also other users of all
safety instructions. In addition to the instructions in this instruction manual, the
general safety and accident prevention regulations must be observed.
This signal stands at points in this instruction manual of particular importance
for compliance with regulations and directives, for correct work flow and for the
prevention of damage to and destruction of the pump.
This symbol signals possible danger caused by the presence of electric fields or
live wires.
0.3. Qualification and training of personnel
The personnel in charge of installation, operation and maintenance of the pumps we
produce must be qualified to carry out the operations described in this manual. Tapflo shall
not be held responsible for the training level of personnel and for the fact that they are not
fully aware of the contents of this manual.