background image

4

Getting Started

The following steps will help 

you set up your loudspeakers 

quickly. 

INITIAL SETTINGS:

1.

 Turn the LEVEL control on the rear panel 

all the way down.

.

 Set the DIRECT/EQ switch out (DIRECT).

3.

 Turn the POWER switch OFF.

CONNECTIONS:

1.

  Connect the line-level signal from your 

mixer (or other signal source) to the 

IN jack on the TH-15A rear panel (XLR 

connector).

.

 Connect the supplied AC power cord 

to the IEC socket on the back of the 

loudspeaker. Plug the other end into an 

AC outlet properly configured with the 

correct voltage as indicated just below 

the IEC socket.

TURN IT ON:

1.

  Turn the POWER switch ON.

.

 Start your signal source (tape deck, CD, 

DAW, or whatever), but leave the master 

level control on your mixer down.

3.

 Slowly turn up the LEVEL control on the 

TH-15A to the “U” (unity gain) mark at the 

center position.

4.

 Adjust the master volume on your mixer 

to a comfortably loud listening level. If 

the volume from the speakers gets really 

loud, really fast, try turning down the 

LEVEL control on the TH-15As a bit. If the 

speakers don’t get loud enough, turn 

up the LEVEL control to achieve a good 

balance of master volume control and 

loudness from the speaker.

Now that you have your loudspeakers 

working, it’s time to hunker down and read 

the rest of this manual…especially the 

following:

ADDITIONAL TIDBITS OF WIDSDOM:

•  Never listen to loud music for prolonged 

periods. Please see the Safety Instructions 

on page 2 for information on hearing 

protection.

•   When you shut down your equipment, 

turn off the TH-15A loudspeakers first 

to prevent thumps and other noises 

generated by any upstream equipment 

from coming out the speakers. When 

powering up, turn on the TH-15As last.

•   Save the shipping boxes and packing 

materials! You may need them someday. 

Besides, your cat will love playing in them 

and jumping out at you unexpectedly. 

Remember to pretend like you are 

surprised!

•   Save your sales receipt in a safe place.
•   Record the serial number in the space 

provided on page 3, along with where 

and when you bought it.

Содержание THUMP TH-15A

















Отзывы: