11
2
Side-Winder Coil Holder dispenses
coil directly into the jaws of your
PRO-III. No need for extra handling
of coil stock or separate layout table.
Pays off big on windy days.
THE “PRO-III COMPLETE” SAVES TIME, INCREASES PROFITS
The “Pro-III Complete” system includes: Pro-III Port-O-Bender, Pro Cut-Off, Side-Winder,
Tapco Pro-Filer and Pro-Stand. On an average day, they can save you hours on the job site!
8
Pro-III’s wide mouth opening and large
working pockets let you form more com-
plex shapes with built-in J-channels to
make your jobs easier, better.
1
Pro-Stand provides solid support
and transports your
PRO-III with all
accessories around the job site.
Saving you time and effort.
4
Pro Cut-Off safely cuts the coil with
a factory edge in seconds. No need
to score and break off material. Saves
time, effort and reduces scrap.
7
PRO-III’s patented “moving pivot”
hinge makes bending easier (re-
quires 35% less lifting) and won’t
scuff material, preventing touch up
work.
Saves 1–2
hours on the
job site in an average day!
•
PRO 2000 Port-O-Bender
•
Pro-Stand
•
Side-Winder
•
Pro Cut-Off
•
Pro-Filer
The
“PRO 2000 Complete” System
Pro Cut-Off
time savings:
PRO-III Hinge
time savings:
Tapco Pro-Filer
time savings:
Pro-Stand
time savings:
Side-Winder
time savings:
In Todays
Busy
Economy You Have
to be “COMPLETE
”
to Compete.
5
Pro-Filer 2000 automatically squares
material fed into your
PRO-III.
Saves time measuring and snipping
coil. (See step 6).
PRO-III Working Pockets,
time savings:
6
In making bend after bend,
Pro-Filer
2000 eliminates the need to mea-
sure, mark and snip each piece of
coil, and ensures accuracy.
3
Pro Cut-Off cuts your coil to length
on the
Side-Winder in seconds.
Also the
Pro Cut-Off does double
duty cutting your coil to width. (See
step 4).
15 min. total
35 min. total
55 min. total
90 min. total
100 min.
total
115 min.
Total per Day
