13
manually activated at the restart of the DVR. Keep this feature on during
normal driving.
f
．
Power Off Delay
Press Up/Down Button in video mode to set power OFF delay. Press OK
button to enter the setting page and Up/Down button to
enable/disable this function, and then press OK button to confirm. Press
Menu or Mode button to exit the setting.
Set the interval between power cut and automatically turning off as
OFF/10s/20s/30s.
g
．
Power ON Delay
Press Up/Down Button in video mode to set power ON delay. Press OK
button to enter the setting page and Up/Down button to
enable/disable this function, and then press OK button to confirm. Press
Menu or Mode button to exit the setting.
Set the interval between the time when power is supplied and the time
it automatically turns on. Options are OFF/10s/20s/30s. If set 10 seconds,
the DVR will power on in 10 seconds after the engine is started.
h
．
Record Audio
Press Up/Down Button in video mode to set record audio. Press OK
button to enter the setting page and Up/Down button to
enable/disable this function, and then press OK button to confirm. Press
Menu or Mode button to exit the setting.
When activated, audio will be recorded alongside video recording.
During video recording, press the down button can enable/disable
audio recording.
i
．
Date Stamp
Press Up/Down Button in video mode to set Date Stamp. Press OK button
to enter the setting page and Up/Down button to enable/disable this
function. Then press OK button to confirm. Press Menu or Mode button to
exit the setting.
When enabled, video will have date stamp on the lower right corner of
the recorded footage. No time stamp will be shown when this feature is
turned off.
Note:
The date and time shall be manually set before first use. Please refer to
System Setting – Date/Time for instructions.
j
．
Collision Sensor Sensitivity Setting
Press Up/Down Button in video mode to set Collision Sensor Sensitivity.
