EN
Package Contents
· 1 x TaoTronics Wireless ANC Earphones
· 1 x USB Charging Cable
· 6 x Ear Buds (two are already installed)
· 6 x Ear Hooks (two are already installed)
· 1 x User Guide
How to Use
1. Charging
1) Connect the charging port with any USB charging adapter or active computer
USB port.
2) Charging will start automatically with the LED indicator turning red.
3) The earphones are fully charged when the LED indicator turns blue.
Note:
·
The LED indicator will flash red when the battery is low.
·
Make sure the battery is fully charged before putting the earphones away for
storage.
·
Charge the earphones at least once every 3 months when not using for a long
time.
2. Pairing
1) Make sure the earphones and your Bluetooth® device are next to each other
(within 3 feet / 1 meter).
Control Functions
Function
Power on / off
Play / Pause / Answer /Hang
up phone calls
Reject phone calls
/ -
Previous / Next Track
ANC on / off
Operation
Press and hold the Multifunction Button until the
LED indicator flashes / turns off.
Press the Multifunction Button once.
Press and hold the Multifunction Button for 2
seconds.
Press the / - Button.
Press and hold the Volume - / + Button.
ANC is turned on by default when the earphones
are powered on.
Press the Multifunction Button twice to disable /
enable ANC.
01/02
CN
产品图示
1. Micro USB充电口
2. 音量- / 上一曲（长按）
3. LED指示灯
4. 多功能键
5. 音量+ / 下一曲（长按）
6. 麦克风（接打电话）
7. 控制面板
8. 头带
9. 电池
10. 耳钩
11. 降噪麦克风
12. 耳塞
2) Press and hold the Multifunction Button to bring the earphones into pairing
mode until you see the LED indicator flashing blue and red.
3) Activate Bluetooth® on your phone and search for nearby Bluetooth®
connections.
4) Find “TaoTronics TT-BH042” in the search results. Tap on the name to connect.
Once connected, the LED indicator will flash blue.
Note:
·
The Bluetooth earphones can remember previously paired devices.
·
If the earphones cannot pair with your Bluetooth® device, clear the pairing
history by pressing and holding the and Volume - buttons for 5
seconds until the LED Indicator turns purple with 2 beep sounds when the
earphones are on.
