Adding Water
- Remove the cover and the tank lid.
- Add up to 400mL water into the water tank.
- Add 2 – 3 drops (0.1 – 0.15mL) of essential oil into the water.
- Put the cover back on.
How to Use
Connect the power adapter. The diffuser is now in standby status. Make sure there is enough water
inside the tank.Use the Light Button to control the color of the light. Use the Mist Button to set the
mist timer, turn misting on/off, and adjust between high and low mist mode.
Light Button
• Press the Light Button once to automatically cycle through different colors. Press again to stay on
the current color. If you keep pressing the Light Button, it will manually cycle through all of the
colors. Press one more time and the light will turn off.
• Press and hold the Light Button for 2 - 3 seconds until two beeps are heard to turn the light off.
Mist Button
• Press the Mist Button once to turn on the 1H mist timer (the corresponding LED indicator will light
up). Keep pressing to cycle through the 3H timer, 6H timer, and ON. When set to “ON”mode,the
unit will stay on until all water has been depleted. You can also press the Mist Button one more
time to manually shut it off.
• When the unit is turned on, press and hold the Mist Button for 2 – 3 seconds to adjust between
high and low mist mode. One beep sound indicates high mist mode is on, and two beep sounds
indicate low mist mode is on.
Important
- Do not exceed the max level when adding water.
- Stop using when water in the water tank is depleted.
- Do not power on when the lid is not properly covered.
- Use with essential oil and water together. Never use with essential oil only.
- Only use with natural essential oil. Synthesized essential oil may damage the product.
05/06
Cleaning the Water Tank
- Unplug the power cord and take off the lid.
- Drain any remaining water from the tank.
- Add some warm water into the tank and mix with detergent, wash with a cleaning cloth.
- Do not use corrosive detergent for cleaning.
Caution
- Please do not repair the product by yourself, always ask a professional electrician or authorized
technician for repairs.
- If you smell a bad odor or anything unusual, please turn off the unit immediately.
- Please do not remove the power plug with wet hands as it may cause electrical shock.
- Do not place this unit on a slope or uneven surface to avoid water leaking or component damage.
- Do not put this unit near any heat source or under direct sunlight.
- Keep away from other electric appliances that are prone to humidity damage.
- Regularly clean the unit if it won’t be used for a long period; store in a dry and shady place.
- When plugged in, do not leave the diffuser unattended when there are children around.
Troubleshooting Guide
Warranty
This product is covered by the TaoTronics Product and Labor Warranty for 12 months from the date
of its original purchase. If manufacturing defects occur, please contact TaoTronics support
(
immediately to launch a warranty claim. We will instruct you on how to
return the defective unit back to us for repair or replacement. No return will be accepted without
seller authorization
Contact
Email: [email protected]
Tel: 1-888-456-8468 ext: 4 (Mon to Fri, 8 am to 5 pm, PST)
Website: www.taotronics.com
Statement
We can only provide after sale service for products that are sold by TaoTronics or TaoTronics
authorized retailer and distributors. If you have purchased your unit from a different place, please
contact your seller for return and warranty issues.
Solution
Connect power adapter
Refer to the instructions
Add water into water tank
Power off and place in a well
ventilated area for 10 minutes
Get rid of some water
Clean the water tank as instructed
Clean air inlet
Cause
No power
Did not press the Mist Button
No water in water tank
The diffuser is getting too hot
Water exceeding max level
Stain built up inside water tank
Air inlet blocked by dust
Problem
No mist coming out
Abnormal mist
Cap on the cover properly
Move the unit to a well
ventilated area
Clean water tank as instructed,
use after air drying
Clean water tank as instructed,
use clean water
Use natural essential oil
Cover not properly covered
Temperature and humidity of
environment is too high
Unit is new
Dirty water
Synthesized essential oil
Water leakage
Bad / strange smell
