What To Do
Move the remote control close to
air conditioner.
Turn off the fluorescence lamp and
try it again.
This is normal. If too loud, set to
lower FAN speed.
Refer to installation instructions or
check with installer.
Clean the air filter.
Set FAN speed to a faster setting to bring
air through cooling coils more frequently
Eliminate the obstacles.
Temperature cannot be adjusted under
AUTO mode.
Temperature setting range: 61°F ~86°F
Increase the set temperature.
For proper water disposal, make
sure the air conditioner slants slightly
from the case front to the rear.
Eliminate the off-flavor source.
Clean the filter.
Disconnect the power, and then
turn on the unit again.
It is normal that there is flowing sound of
refrigerant inside the air conditioner.
Heat expansion or shrinkage for the
panel due to temperature change,
which causes friction sound
.
Possible Causes
There's fluorescence lamp
in the room.
Air movement sound.
Window vibration – poor
installation.
Dirty air filter - air restricted.
Outside temperature
extremely hot.
The air outlet or air inlet
is blocked.
The unit operates under
AUTO mode?
The required temperature
exceeds the temperature
setting range?
Set temperature too low.
The air conditioner is not
tilted to the outside.
There's off-flavor source in
the room, such as furniture,
cigarette, etc.
The unit is interfered by
thunder, radio, etc.
The unit is turned on or
turned off just now.
The unit is turned on or
turned off just now.
Problem
Air conditioner can't
receive signal from
remote control or the
remote control is not
sensible
Noise when
unit is cooling
Air conditioner
turns on and off
rapidly
No air blewout
from air conditioner
Set temperature
cannot be
adjusted
Room too cold
Water drips
indoors
There's off flavor
There's abnormal
sound during operation
You can hear
water-flowing sound
You can hear
"PAPA" sound
WARNING
· If below abnormalities occur, please turn off the air conditioner and disconnect the power
immediately. After that, please contact Customer Service for support.
→
Power cord is overheating or damaged.
→
There's abnormal sound during operation.
→
There's burning smell.
→
Power cord test or reset button often bounces automatically.
→
Water leakage at indoor side.
· Do not repair or refit the air conditioner by yourself.
· Operate the air conditioner under abnormal status will cause malfunction, electric shock or
fire hazard.
Warranty and Service
This product is covered with TaoTronics product and labor warranty for 12 months from the
date of its original purchase. If any problems occur, please contact the TaoTronics Customer
Care Centre via the contact information listed in this User Guide.
We can only provide after sales service for products that are sold by TaoTronics or TaoTronics
authorized retailers and distributors. If you have purchased your unit from a different place,
please contact your seller for return and warranty issues.
29
30
01
03
05
07
09
11
13
15
17
19
21
23
25
27
02
04
06
08
10
12
14
16
18
20
22
24
26
28
