TaoTronics SoundLiberty 53 TT-BH053, Руководство пользователя

Страница: 8 / 45

07 08
Pairing
• You can use one earbud or both earbuds as per your preference. Please
refer to the corresponding pairing instructions.
• Before pairing, please turn off other Bluetooth devices and place the device
to be connected close to the earbuds.
• When the earbuds are disconnected from your device for more than 10
minutes, they will turn off automatically.
Couple Earbuds Mode
1. Take the earbuds out of the charging case. They will connect with each
other automatically. The LED indicators on both earbuds will flash blue
once. Then the LED indicator on both earbuds will flash blue and white
alternately indicating the earbuds are in pairing mode now.
2. Turn on the Bluetooth function on your device and search for nearby
devices. Find “TAOTRONICS SoundLiberty 53”in the searching results, tap
on the name to connect.
3. Once connected, the LED indicators on both earbuds will flash blue slowly.
Note: It is not recommended to wear the two earbuds on different people. If
needed, please keep the 2 earbuds within 3 meters / 9.8 feet in couple
earbuds mode.
Single Earbud Mode
1. Take out one earbud from the charging case, it will enter pairing mode with
the LED indicator flashing blue and white alternately.
2. Turn on the Bluetooth function on your device and search for nearby
devices. Find “TAOTRONICS SoundLiberty 53”in the searching results, tap
on the name to connect.
3. Once connected, the LED indicator will flash blue slowly.
Note:
If you want to change to couple mode, simply take out the other earbud from
the charging case, they will pair with each other automatically.
Restore to Factory Settings
If you failed to pair your device with the earbuds, please restore them to
factory settings as instructed below:
1. Take the earbuds out of the charging case, then place them back again.
Tap and hold the Multifunction Touch Control of both earbuds for 10
seconds until the LED indicators flash three times to enter reset mode.
2. If you have paired your device with the earbuds before, remove
"TAOTRONICS SoundLiberty 53" from the bluetooth device list and pair
again.
3. Take out both earbuds, and they will pair with each other automatically. Pair
them with your device when the LED indicator on the right earbud flashes
blue and that on the left earbud flashes blue and white alternately.
Note:
If you want to pair the earbuds with another device when you have already
paired them with a device, deactivate the Bluetooth function on the paired
device or clear “TAOTRONICS SoundLiberty 53” from its Bluetooth list.
Restore the earbuds to factory settings as instructed above if pairing failed.
OPERATION AND FUNCTIONS
Function
Play / Pause
Operation
Tap the Touch Control on
either of the earbuds twice
Tap the Touch Control on the
right earbud
Tap the Touch Control on the
left earbud
Tap the Touch Control on the
right earbud three times
Tap the Touch Control on
either of the earbuds once
Tap the Touch Control on the
left earbud three times
Tap and hold the Touch
Control on either of the
earbuds for 2 seconds
Tap the Touch Control on
either of the earbuds twice
Volume -
Next Track
Previous Track
Answer Phone
Call
Decline an
Incoming Call
Turn On / Off
Voice Control
Hang up
Phone Call
When paired successfully,
press and hold the Touch
Control on either of the
earbuds for 2 seconds until a
beep is heard.
Voice Prompt
/
Toots when highest setting
is reached
Toots when lowest setting
is reached
/
/
Ring tone sounds when call
is incoming
Toot when Connected
Toot
Toot
Toot