Ambient Light / Proximity Sensor
I
NITIAL
H
ARDWARE
S
ETUP
The software should be installed prior to connecting any hardware to the computer. Follow the
instructions found in the Quick Start Guide (QSG). This will load the required driver for the USB
interface and also the graphical user interface (GUI).
The hardware consists of the Controller EVM v2.1 motherboard, the TCS3771 evaluation
daughterboard and a USB interface cable.
When the USB cable is connected the green LED should light up indicating that power is being
received via the USB interface, and the controller board processor is running. If the green LED does
not light up check the USB cable connections unplug the USB cable and try again. If after re-try no
green LED check the PC for USB error messages. See resources section at end of this document for
additional assistance.
T
EXAS
A
DVANCED
O
PTOELECTRONIC
S
OLUTIONS
(TAOS)
PROVIDES CUSTOMER SUPPORT IN VARIED TECHNICAL AREAS
.
S
INCE
TAOS
DOES NOT
POSSESS FULL ACCESS TO DATA CONCERNING ALL OF THE USES AND APPLICATIONS OF CUSTOMERS
’
PRODUCTS
,
TAOS
ASSUMES NO RESPONSIBILITY
FOR CUSTOMER PRODUCT DESIGN OR THE USE OR APPLICATION OF CUSTOMERS
’
PRODUCTS OR FOR ANY INFRINGEMENTS OF PATENTS OR RIGHTS OF
OTHERS WHICH MAY RESULT FROM
TAOS’
ASSISTANCE
.
WWW
.
TAOSINC
.
COM
2
OF
14
