http://www.titanjet.com.cn
Tel
：
+86-760-88667089 / 88667090
Fax
：
+86-760-88667096
Web: http://www.titanjet.com.cn
email:[email protected]
Add
：
No.6-2,Jin Hua Zhong Road,Zhongshan City,Guangdong,China
- 31 -
7
、
control software related introduction
Parameter setting
：
7.1
、
Print head Setting
7.1.1
、
users don’t need to calibrate the print head by themselves due to the calibration has been done
before export in factory.
7.1.2
、
Single print head printer no need to adjust.
7.1.3
、
Carriage speed
：
there are 3 mode speed of the carriage: speed 1,speed 2
、
speed 3
（
Low speed
、
medium
speed
、
High speed
）
7.1.4
、
Two-way Adjust
：
If you choose double direction in Usually Parameter setting. need to adjust two-way
value
。
To confirm the printing start line if align or not, click testing, you will see the following printing
：
If the up and down line keep alignment at a digital, it means the two-way value is the one; you should type the
digital to the Two-way value. For example, in the above printing, the up and down line keep alignment at digital
9, then you should type 9 into the two-way adjust.
7.2
、
Adjust print head
：
7.2.1
、
Check Nozzle
：
see introduction of Tool Menu
7.2.2
、
Single Print head Adjust
：
Adjust the X axis of single print head 1901
Click print head adjust, if the above situations happened, it means the installation of X axis of print head is