manualshive.com logo in svg

Tao Motor G125, Руководство пользователя

Поделиться
Скачать
Tao Motor G125 Скачать руководство пользователя страница 41

MAINTENANCE

Due to the nature of the adjustments marked with a √ on the following chart, it is 

recommended that service be performed by an authorized Tao Motor dealer.

• Perform maintenance more often if you use your ATV under severe conditions, such as dirty or wet conditions to 

purge water or dirt contamination from grease fittings and other critical components.

PERIODIC MAINTENANCE SCHEDULE

Careful periodic maintenance will help keep your vehicle in the safest, most reliable condition. Inspection, adjustment 
and lubrication intervals of important components are explained in the following chart on the following pages.

Maintenance intervals are based upon average riding conditions and an average vehicle speed of approximately 10 miles 
per hour. Vehicles subjected to severe use, such as operation in wet or dusty areas, should be inspected and serviced 
more frequently.

Inspect, clean, lubricate, adjust or replace parts as necessary.

Inspection may reveal the need for replacement parts. Always use genuine 

Tao Motor parts available from your dealer.

Maintaining your vehicle to the maintenance schedule in this manual is critical to the vehicle's operation.

CAUTION

NOTE

31

Содержание G125














































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды