manualshive.com logo in svg

Tao Motor D125, Руководство пользователя

Поделиться
Скачать
Tao Motor D125 Скачать руководство пользователя страница 17

The adjustable speed limiter screw must be installed for operation. Failure to install a speed limiter 
screw may result in water or dirt ingestion and potential damage to the vehicle.

FRONT BRAKE LEVER
The front brake lever is located on the right handlebar. To apply the front brake, pull the brake lever toward the 
handlebar grip. 

REAR FOOT BRAKE LEVER
The rear foot brake lever is located on the right foot rest . To apply the rear brake, push the brake with your 
right foot toward the  ground. 

NOTICE

 SPEED LIMITER ADJUSTMENT

1. Locknut

2. Adjustment Screw

3. Adjustment Range

Adults should always limit maximum restricted 

speed within the ability and capacity of the child to 

operate the ATV safely. Never allow the child to 

adjust the speed limiter screw.

To increase top speed

 

SPEED LIMITER

The D125, T125  ATV is equipped  with a vehicle speed limiter adjusting screw. Beginning riders should start with 
slowest setting to learn how to control this vehicle. Once the operator has demonstrated mastery of the ATV, the 
supervising adult can adjust speed limiter screw to increase the top speed . The vehicle speed limiter keeps the 
throttle from fully opening, even when the throttle lever is pushed to the maximum. The adjusting screw may be 
gradually turned out as the beginner becomes more familiar with operating this ATV. 

To decrease top speed

 

1. Loosen locknut (#1).

2. To decrease the top speed of the ATV turn the adjustment screw clockwise. (#2).

3.Tighten the locknut to set adjustment screw in desired position(#1).

1. Loosen locknut (#1).

2. To increase the top speed of the ATV turn the adjustment screw counter 

clockwise. (#2).

3. Tighten the locknut to set adjustment screw in desired position(#1).

8

Содержание D125










































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды