manualshive.com logo in svg

Tao Motor 150 G, Руководство пользователя, Страница: 13 / 80

Поделиться
Скачать
Tao Motor 150 G Скачать руководство пользователя страница 13

Use this switch to "Stop" the engine in an emergency situation.  

The engine will not start when this switch is set to this position.

Set this switch to "Run" position before starting the engine. 

THROTTLE 

Once the engine is running, push the throttle lever to increase the engine speed.  Regulate the speed of the ATV by varying the throttle 
position. The throttle lever is spring-loaded to return to the start position when let go. Before starting the engine, make sure the throttle 
lever is smooth in operation and will return to the start position. If throttle lever is not smooth in operation or will not return to start 
position do not start engine.

MAIN SWITCH

Engine Start/Stop Switch

START BUTTON

Push start button to crank the engine with starter. See the starting instructions on page 1

8

 before 

starting the engine.

HEADLIGHTS 

This 

150 G

 

ATV is equipped with High, Low, headlight features. 

When ignition key is set to the " On " potion press the headlight switch to turn on headlights and to 

toggle through modes.

Never operate this ATV with headlights set to "Low" mode. Always 

ride this ATV with the headlights set in the "High" position.

1. Headlight Hi/Low Switch

2. Headlight On/Off Switch 

3. Engine Run/Stop Switch

4. Engine Start Button 

4

Содержание 150 G

















































































Отзывы:

Нет отзывов