Tantalus XR-3100, Руководство по установке

Страница: 10 / 19

page 4 Tantalus Systems Corp.
WAN
STATUS
LED
LAN
STATUS
LEDs (3)
PROGRAMMING
CONFIGURATION
LED
Figure 1 The XR-3100 serial port with the DT-
100 Cross band programming cable attached.
Figure 2 Position of the XR-3100 programming and status LEDs
Figure 3 Switch position to select the
LAN Controller.
Figure 4 The green programming CONFIG LED
indicating communication to the LAN Controller.
5. Plug in the power cord. The CONFIG LED should now be green as shown in Figure 4. If it
is red, immediately disconnect the power cord and check the toggle switch on the
programming connector.
6. Start the DT-150 software. Click the read icon once. A new window will appear.
Should nothing come up then check all connections and settings.
7. LAN Programming: