© Tansun Limited 2008 Part No. 043017 Issue. D
Replacing a Lamp
1. Disconnect from the power supply before attempting to replace any lamp.
2. Remove the guard by removing the guard fixing screws.
3. Remove the screws from the end extrusion(s) and fascia panels adjacent to the failed
lamp (see Fig. 5 for illustrative purposes only).
4. Remove the panels to expose the lamp connections (see Fig. 6) .
5. Disconnect lamp leads from terminal plates and remove the retaining clips (see Fig. 7)
6. Slide the lamp through the extrusion.
7. Fit a new lamp, taking care not to mark the reflector or handle the lamp (see caution note
below).
8. Replace the end extrusion(s) and fascia panels securely, using the fixings previously
removed and refit the guard.
Maintenance
In the event of heater failure or for spare parts or advice, please contact the manufacturer in the first instance.
Disconnect from the mains by removing the plug from the socket outlet before commencing any maintenance procedure including
cleaning.
Caution!
Do not handle lamp with bare hands.
Remove finger marks with a soft cloth and methylated spirit or
rubbing alcohol. Finger marks will burn into the quartz glass
causing premature lamp failure.
Please note:
Beaver and Spotter outer casings can reach high
temperatures.
F o l l o w i n g i n f o r m a t i o n i s o n l y f o r E U - m e m b e r s t a t e s :
The use of this symbol indicates that this product may not be treated as household waste. By ensuring this product
is disposed of correctly, you will help prevent potential negative consequences for the environment and human
health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed
information about recycling of this product, please contact your local council, your household waste disposal service
or the shop where you purchased the product.
Fig. 5
Fig. 6
Fig. 7
Reference Manual
Spotter HS030 &
Beaver HB030
Spectrum House, Unit 1, Ridgacre Road, West Bromwich,
West Midlands, B71 1BW, England.
Tel: +44 (0)121 580 6200 - Fax: +44 (0)121 580 6222
Email: [email protected] - Website: www.tansun.com
