VXP Series Operation Manual rev 1.0.2
4. Rear Interface Panel
7
4. Rear Interface Panel
XLR FEMALE AUDIO INPUT
- This is a lockable
XLR line input socket for connection to the audio
source. Fully balanced: pin 2 hot (+), pin 3 cold (+),
& pin 1 ground.
XLR MALE AUDIO LINK
- This is a lockable XLR line
output socket to link additional speakers.
Fully balanced: pin 2 hot (+), pin 3 cold (+),
& pin 1 ground.
POWER MODE SWITCH
(right) – Selects AUTO or
MANUAL power on/off mode.
HPF MODE SWITCH
– Inserts or removes
90 Hz high pass filter.
LEVEL CONTROL
– Recessed potentiometer for
adjustment of speaker volume.
LED INDICATORS
– Top to bottom:
Limit protect indicates activity of built-in speaker
protection limiter.
Signal indicates when audio signal is present at
the input.
Power state LED (Red) = StandBy
Power state LED (Green) = Active
Power state LED (Amber) = Temp protection active.
Since we have the auto power on/off functionality,
there are mulitple ways for this LED to change colour
(Red/green).
ROCKER POWER SWITCH
- Supplies AC power on
to the unit (100 V - 240 V)
AC MAINS CONNECTOR
- Neutrik powerCON mains
connector (mating connector supplied)
XLR FEMALE
AUDIO INPUT
XLR MALE
AUDIO LINK
POWER MODE SWITCH
ROCKER
POWER SWITCH
HPF MODE SWITCH
AC MAINS
CONNECTOR
LEVEL CONTROL
LED INDICATORS
