VXP 12.2Q
VXP 12.2Q // issue 1.00 // 20.02.12
Tannoy (Direct UK)
T: +44 (0) 1236 420199
TCGI (ROW sales)
T: +45 8742 7000
TCGA (Americas sales)
T: +1 (519) 745 1158
Tannoy Middle East
T: +971 (04) 4401208
TECHNICAL SPECIFICATIONS
System
VXP 12.2Q
Frequency response (-3 dB)
(1)
60 Hz - 25 kHz
Full-range mode
Frequency range (-10 dB)
(1)
47 Hz - 30 kHz
Full-range mode
Frequency response (-3 dB)
(1)
100 Hz - 25 kHz
Hi-Pass mode
Frequency range (-10 dB)
(1)
80 Hz - 30 kHz
Hi-Pass mode
Dispersion (-6 dB)
75 degrees (H) x 40 degrees (V)
Driver complement
1 x 300 mm (12”) PowerDual™
with Q-Centric waveguide
1 x 300 mm (12”) bass driver
Crossover
Passive 300 Hz and 1.5 kHz
Directivity factor (Q)
13 (averaged 1 kHz to 8 kHz)
Directivity index (DI)
11.1 dB (averaged 1 kHz to 8 kHz)
Rated maximum SPL
(2)
125 dB (average) 131 dB (peak)
Distortion
10% Full Power (20 V)
2nd Harmonic 3rd Harmonic
250 Hz
2.49%
0.49%
1 kHz
0.54%
0.73%
10 kHz
7.54%
0.80%
1% Full Power (6.33 V)
2nd Harmonic 3rd Harmonic
250 Hz
0.60%
0.21%
1 kHz
0.20%
0.49%
10 kHz
2.56%
0.10%
Construction
Enclosure
57 litre, 15 mm (enclosure) and
18 mm (front) birch plywood, vented
and internally braced.
Finish
Textured black or white paint,
with custom colours on request.
Powder-coated perforated steel
grille, Airnet cloth behind.
Connectors
1 x female XLR (input),
1 x male XLR (link),
1 x Neutrik powerCON
Controls & Indicators
Level Control
Power LED (Blue)
Signal LED (Green)
Limit/Protect LED (Red)
Full Range / HighPass Switch (110 Hz)
Power Mode Switch
Power Switch
Fittings
8 x M10 Flying inserts (portrait or
landscape mounting), 8 x M10 yoke
bracket inserts. 2 x Integrip carrying
handles. Blanking plate for optional
VTH pole mount
Dimensions
780 x 370 x 380 mm (HxWxD)
30.7 x 14.6 x 15” (HxWxD)
Ordering Information
PART NUMBER
MODEL NAME
COLOUR
PACKED QUANTITY
8001 6560
VXP 12.2Q
BLACK
1
8001 6561
VXP 12.2Q
WHITE
1
Net weight
35 kg (77.2 lbs)
Shipped weight
38 kg (83.8 lbs)
Packed quantity
1
Amplifier
Maximum signal
Input attenuator at Maximum: +4.5 dBu
input for clip
(Hard clip will occur at +14.5 dBu
input signal)
Dynamic range
106 dB
Efficiency
> 90%
Damping factor
> 400 ref 8 ohms at 1 kHz
Distortion
< 0.05% @ 1 kHz -3 dB output
(22 kHz bandwidth)
Input impedance
10 kohms unbalanced, 20 kohms balanced
Damping factor
> 400 ref 8 ohms at 1 kHz
Distortion
< 0.05% @ 1 kHz -3 dB output
(22 kHz bandwidth)
Protection systems
Over current
Output current limiter, always active
Clip limiter
Output voltage clip limiter, always active
Temperature
Over temperature causes protective mute
Brownout
Automatic protection and recovery
Mains
Inrush current limiter
Indicators
1 x Power LED, 1 x Signal LED, 1 x Limit
LED (Power LED: Red = Standby,
Green = On, Yellow = Temperature
protection active)
Amplifier type
Inherently bridged, globally
modulated, high performance
single channel class D.
PSU specifications
Input connector
Locking Neutrik powerCON
Voltage selection
Universal mains input
Type
High efficiency, regulated switch mode
power supply
Efficiency
> 85% typical
Input voltage
100 Vac-240 Vac +/- 10%,
50-60 Hz +/- 10%
Mains fuse
Internal
Fuse type
3.15AT
Other features
Inrush current limiter
Standby power consumtion < 1 W
Idle power consumption
< 15 W
Maximum power consumtion 300 W
Notes
(1) Average over stated bandwidth. Measured at 1 metre on axis in an anechoic
chamber.
(2) Unweighted pink noise input, measured at 1 metre in an anechoic chamber.
A full range of measurements, performance data, and Ease™ Data can be downloaded
at www.tannoy.com.
Tannoy is committed to a policy of continuous improvement through research and
development. Though performance will equal or exceed published specifications,new
materials or manufacturing processes could introduce variances. All figures are subject
to change without notice. For critical applications, please confirm current specifications
with your supplier or visit the Tannoy website at www.tannoy.com.