VQ 100
Tannoy adopts a policy of continuous improvement and product specification is subject to change
VQ 100 data file // issue 1.05 // 16.04.09
Tannoy United Kingdom
T: 00 44 (0) 1236 420199
Tannoy Deutschland
T: 00 49 (180) 1111 881
Tannoy France
T: 00 33 (0)1 7036 7473
TC|Group Americas
T: 00 1 (519) 745 1158
The loudspeaker shall consist of a Dual Concentric™ Compression driver with a 3.5” Midrange voice coil and a 2” High Frequency voice coil, both mounted
in a common subsystem with a common 2" exit. This Dual Concentric™ compression driver shall be coupled to a PSW™ (Point Source Waveguide) constant
directivity horn operating over the frequency range of 450Hz to 23kHz. The low frequency section consists of two 300mm (12”) woofers, and shall be
mounted in a semi-horn loaded enclosure to provide significant off axis attenuation below 450Hz. The loudspeaker shall be user configurable for either
Bi-Amp of Tri-Amp operation via the rear input panel. The loudspeaker shall be trapezoidal in shape.
Performance of the loudspeaker, using the recommended electronic control shall meet or exceed the following criteria:
The Low Frequency section shall produce a sound pressure level of 105dB SPL on axis at 1 meter with a power input of 1 Watt, and shall be capable of
producing a peak output of 141dB SPL on axis at 1 meter. In Bi-amp mode the Mid/High section shall produce a sound pressure level of 110dB SPL on axis
at 1 meter with a power input of 1 Watt, and shall be capable of producing a peak output of 140dB SPL on axis at 1 meter. In Tri-amp mode the Mid
frequency section shall produce a sound pressure level of 111dB SPL on axis at 1 meter with a power input of 1 Watt, and shall be capable of producing a
peak output of 140dB SPL on axis at 1 meter. The High Frequency section shall produce a sound pressure level of 110dB SPL on axis at 1 meter with a
power input of 1 Watt, and shall be capable of producing a peak output of 139dB SPL on axis at 1 meter. The Low Frequency section shall handle 1000
Watts of amplifier power and shall have a nominal impedance of 4 Ohms. In Bi-amp mode the Mid/High section shall handle 400 Watts of amplifier power
and shall have a nominal impedance of 8 Ohms. In Tri-amp mode the Mid frequency section shall handle 400 Watts of amplifier power and shall have a
nominal impedance of 8 Ohms. The High Frequency section shall handle 180 Watts of amplifier power and shall have a nominal impedance of 8 Ohms. The
dispersion of the loudspeaker shall be 100 degrees conical (-6dB). The enclosure shall be of birch plywood construction and internally braced. The enclosure
shall be fitted with eight integral carrying handles, and twelve M10 inserts for flying hardware. The enclosure shall not exceed the following dimensions
(H x W x D): 925mm x 694mm x 515mm (36.42" x 27.32" x 20.28").
The loudspeaker shall be the Tannoy...VQ 100.
Architectural specifications
