VLS Series Operation Manual rev 1.1.0
15
10. Technical Specifications
10. Technical Specifications
10.3 VLS 30
Ordering Information
Part Number
Colour
8001 7020
Black
8001 7021
White
This product is environmentally protected
to IP65 rated standard.
Notes:
1.
Average over stated bandwidth. Measured in
an IEC baffle in an Anechoic Chamber
2.
Unweighted pink noise input, measured at
1 metre on axis
3.
Long term power handling capacity as defined
in EIA - 426B test
A full range of measurements, performance
data, CLF and Ease™ Data for VLS 30 can be
downloaded from www.tannoypro.com.
Tannoy operates a policy of continuous research
and development. The introduction of new materials
or manufacturing methods may introduce variations
in actual performance; however, actual performance
always will equal or exceed the published
specifications, which Tannoy reserves the right to
alter without prior notice. Please verify the latest
specifications when dealing with critical applications.
Copyright (c) 2014 Tannoy Limited. All rights reserved.
Performance
Frequency response (-3 dB)
(1)
120 Hz - 22 kHz
Frequency range (-10 dB)
(1)
90 Hz - 35 kHz
System sensitivity (1 W @ 1 m)
(2)
94 dB
Horizontal dispersion (-6 dB)
130 degrees horizontal
Vertical dispersion (-6 dB)
+ 3 degrees / - 11 degrees (-4 degree bias)
Driver complement
14 x 3.5” (89 mm) woofers
16 x 1” (25 mm) metal dome tweeters
Crossover
Passive network utilising Focussed Asymmetrical Shaping Technology (FAST)
Crossover point 2.5 kHz
Directivity factor (Q)
15 averaged 1 kHz to 10 kHz
Directivity Index (DI)
11.8 averaged 1 kHz to 10 kHz
Power Handling
(3)
Average
400 W
Programme
800 W
Peak
1600 W
Recommended Amplifier Power
1200 W @ 4 ohms
Nominal Impedance (Lo Z)
6 ohms
Rated maximum SPL (1 M, Lo Z)
(2)
Average
120 dB
Peak
126 dB
Transformer Taps (via front rotary switch)
70 V
150 W / 75 W / 37.5 W / 19 W / 9.5 W / 5 W
OFF & low impedance operation
100 V
150 W / 75 W / 37.5 W / 19 W / 9.5 W
OFF & low impedance operation
Distortion
10% full power
Harmonics
2nd
3rd
250 Hz
1.60%
0.91%
1 kHz
0.14%
0.15%
10 kHz
0.63%
0.26%
1% full power
250 Hz
0.57%
0.43%
1 kHz
0.06%
0.06%
10 kHz
0.21%
0.14%
Physical
Enclosure
Aluminium extrusion
Finish
Paint RAL 9003 (white) & RAL 9004 (black)
Custom RAL colours available (additional cost and lead-time)
Connectors
Barrier strip
Fittings
Flying bracket, wall mount bracket, input panel cover plate and gland
Dimensions (H x W x D)
1460.5 x 121 x 146 mm (57.5 x 4.8 x 5.7”)
Net Weight (ea)
20 kg (44 lbs)
Packed Quantity
1
