V8
The loudspeaker shall consist of a 200mm (8.00”) full range, single point source Dual Concentric™ transducer. The low and the high frequency elements
shall be combined by an internal passive crossover network operating at 1.7kHz, with 2nd order high pass, 2nd order low pass. A configurable
switching arrangement on the input panel allows the user to select between full range passive or bi-amped two way powering modes.
Performance of the loudspeaker, without any electronic control shall meet or exceed the following criteria: frequency response measured at 1 metre
on axis with swept sine wave shall be 85Hz - 22kHz (+/-3dB). Sensitivityshall be at least 92dB (anechoic) for 2.83 volts @ 1 metre and shall be
capable of producing a peak output level of 119dB (anechoic) on axis at 1 metre.
The dispersion of the loudspeaker shall be 90 degrees conical (-6dB). The system shall have a nominal impedance of 8 Ohms, maximum power handling
shall be 520 Watts (programme). The enclosure shall be an optimally tuned 37.5 litre vented enclosure of birch plywood construction. The enclosure
shall be fitted with an integral carrying handle, blanked off recess for optional pole-mount socket installation, 2 x M10 bracket inserts for landscape
or portrait mounting and 4 x M10 mounting points for flying hardware. The enclosure shall not exceed the following dimensions:
388 x 280 x 275mm or 15.28 x 11.02 x 10.83“ (H x W x D)
The loudspeaker shall be the Tannoy...V8.
Architectural specifications
Tannoy adopts a policy of continuous improvement and product specification is subject to change
