Tannoy TKT Series Скачать руководство пользователя страница 7

Страница: 7 / 19

TKT Series

Quick Start Guide

Thank you for choosing a TANNOY loudspeaker product for your application. If you would like further

information about this or any other product, please visit our website at musictribe.com.

Unpacking the Loudspeaker

After unpacking the unit, please check carefully for damage. If damage is found, please notify your

supplier at once. You, the consignee, must instigate any claim. Please retain all packaging in case of

future return shipment.

System Requirements

TKT are passive 2-way and 3-way loudspeakers, all of which can be driven directly from a single amplifier

channel with no controller. For optimum performance or for use with a subwoofer, they require 1 amplifier

channel and 1 controller channel. The input signal is divided between the low-frequency and high-frequency

drivers internally with a passive crossover.

Amplifier Considerations

The TKT series loudspeaker enclosures should be driven by high-quality power amplifiers designed for true

professional use. Power amplifiers should be capable of delivering long term broadband power equal to half

the loudspeaker’s peak power rating at its stated nominal impedance. The use of underpowered amplifiers

mustbe avoided as heavily clipped signals can cause permanent loudspeaker damage. Limiters, crossovers

and equalisation points must be set in accordance with the specifications provided below. This will ensure the

optimum sound quality and long-term reliability as well as protection from damage.

Crossovers

TKT Series loudspeakers are supplied as standard for passive operation via the internal crossover network.

If higher peak outputs and additional low frequency output is required, then the TKT series can be used in

conjunction with the Tannoy SC1 digital controller. Each input on the network enabled VNET SC1 has gain

control and 4 bands of parametric EQ with bands 1 and 4 of ering settings for LF and HF shelving response.

The unique routing engine will allow any input to be sent to any output.Various i lter types are available on

all outputs which can be coni gured as 2-, 3- or 4-way crossovers. All output channels feature an independent

speaker alignment delay (200 ms per channel) and a 4-band parametric EQ for speaker management.

Four high performance limiters are lso available.

TKT Series

er Considerations

The TKT series loudspeaker enclosures should be driven by high-q

delivering long term broadband power equal to half the loudspeaker’s peak power rating at its stated nominal impedance. The use

be avoided as heavily clipped signals can cause permanent loudspeaker damage. Limiters, crossovers and equalisation points must be set in accordance with the

damage.

Model

TKT105

TKT102

TKT122

Minimum

Power

Continuous RMS

150 W

300 W

500 W

Peak

600 W

1200 W

2000 W

Crossovers

TKT Series loudspeakers are supplied as standard for passive operation via the internal crossover network. If higher peak outputs and additional low frequency output

is required, then the TKT series can be used in conjunction with the Tannoy SC1 digital controller. Each input on the network enabled VNET SC1 has gain control and

LF and HF shelving response. The unique routing engine will allow any input to be sent to any output.

ature an independent speaker alignment

delay (200 ms per channel) and a 4-band parametric EQ for speaker management. Four high performance limiters are also available.

Connections

TKT105 connection is made via screw terminal binding posts. TKT102 and TKT122 have inputs on 1 x SpeakON

4-pole connector and 1 x barrier strip terminal.

Binding post terminals are capable of accepting cables with a conductor of up to 4 mm sq CSA (AWG 12). Red

is positive and black is negative. The SpeakON connectors will accept wire up to 4 mm sq CSA (AWG 12) with

an outside diameter of up to 15 mm and a current rating of 30 A. Tannoy have adopted the conventional

wiring standard for the TKT series product: pin 1+ is positive pin 1- is negative. Barrier strips accept wire up to

4 mm sq CSA (AWG 12). Barrier strip polarity is as indicated.

Quick Start Guide

Connections

TKT105 connection is made via screw terminal binding posts. TKT102 and TKT122 have inputs on 1 x SpeakON 4-pole connector and 1 x barrier strip terminal.
Binding post terminals are capable of accepting cables with a conductor of up to 4 mm sq CSA (AWG 12). Red is positive and black is negative. The SpeakON connectors

will accept wire up to 4 mm sq CSA (AWG 12) with an outside diameter of up to 15 mm and a current rating of 30 A. Tannoy have adopted the conventional wiring

standard for the TKT series product: pin 1+ is positive pin 1- is negative. Barrier strips accept wire up to 4 mm sq CSA (AWG 12). Barrier strip polarity is as indicated.

Models: TKT105