Tannoy System 600, Руководство пользователя

Страница: 9 / 12

TECHNICAL SPECIFICATIONS
Loudspeaker
Frequency response (1) 52 Hz - 20 kHz
Recommended amplifier power 50 to 150 W rms into 8
Ω
Power handling Average (2) Programme
80 W rms 160 W rms
Nominal Impedance 8
Ω
Sensitivity (3) 90 dB SPL / 1 W @ 1 m
Distortion < 0.8%
Dispersion (@ -6dB) 90
°
conical
Crossover frequency 1800 Hz
Cabinet
Drive unit 6.5 “ Tannoy Dual Concentric type 1678
Low frequency design Optimised bass-reflex load, in 13 litres
Cabinet construction MDF (36 mm) front and back panels,
19 mm high density particle board.
Cabinet finish Spray ‘F’ Vinyl
Cabinet dimensions (HxWxD) 220 mm x 360 mm x 267 mm
Cabinet weight 7.5 kg
Shipping dimensions (HxWxD) 450 mm x 695 mm x 300 mm
Shipping weight 17 kg
NOTES : (1) +/- 3 dB , measured at 1m in an anechoic chamber.
(2) Long term power handling capacity as defined in EIA standard RS426A.
(3) Averaged over specified bandwidth for half-space environment. For anechoic conditions the figure is to be
decreased by 3 dB.
Tannoy operate a policy of continuous research and development. The introduction of new materials or manufacturing
methods will always equal or exceed the published specifications which Tannoy reserve the right to alter without prior
notice. Please verify the latest specifications when dealing with critical applications.