5
2. Fix bracket to wall surface
QFLEX 32LS Mounting and Installation Guide rev 2.2.0
2. Fix bracket to wall surface
Whenever a Tannoy Professional loudspeaker is fixed to a surface using a Tannoy Professional Hardware
device, the installer must ensure that the surface is capable of safely and securely supporting the
load. The hardware employed must be safely, and securely attached both to the loudspeaker and also
to the surface in question, using only the fixing holes provided as standard and in accordance with
the instructions in this document. Secure fixings to the building structure are vital. Seek help from
architects, structural engineers or other specialists if in any doubt.
3. QFlex 32LS Assembly
It is recommended that you assemble the column horizontally on a flat surface. Lay some cloth or
cardboard on the surface to avoid scratching the surface of the product during the assembly process.
In the hardware pack you will find two wall brackets and joining hardware consisting of two heavy
joining plates with hinge points, four small link bars and M4 Phillips screws.
Place each module in its respective position on the assembly area keeping them slightly spaced apart.
Take the flying RJ45 connector in the lower module and insert it into the RJ45 socket in the middle
module. Take the flying AC mains connector in the lower module and insert it into the female connector
in the middle module. Take the flying RJ45 connector in the middle module and insert it into the RJ45
socket in the top module. Take the flying AC mains connector in the middle module and insert it into the
female connector in the top module.
CAT 5
POWER CORD
