Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
E: [email protected]
E: [email protected]
E: [email protected]
E: [email protected]
POWERV
S
15 BP
Tannoy adopts a policy of continuous improvement and product specification is subject to change
POWERV
S
15 BP data file // Issue: 1.06 // 15.01.08
TECHNICAL SPECIFICATIONS
System Type
Subwoofer - Bandpass
Frequency Response (-3dB)
(1)
47Hz - 80kHz
Low pass flilter A on
Frequency Range (-10dB)
(1)
47Hz - 110kHz
Low pass filter B on
Frequency Response (-3dB)
(1)
37Hz - 80kHz
Low pass filter A on
Frequency Range (-10dB)
(1)
37Hz - 110kHz
Low pass filter B on
Driver Complement
1 x 380mm (15.00”)
High excursion bass driver
Crossover
User selectable LPF
Rated Maximum SPL
(2)
Average
124dB
Peak
130dB
Distortion
10% Full Power (
15.5V
)
2nd Harmonic
3rd Harmonic
40Hz
0.65%
0.67%
100Hz
3.05%
0.70%
1% Full Power (
4.9V
)
2nd Harmonic
3rd Harmonic
40Hz
0.13%
0.30%
100Hz
0.76%
0.24%
PSU Specifications
Input Connector
Locking Neutrik Powercon
Voltage Selection
Automatic (115 / 230V, 45 - 65Hz)
Type
High current, high frequency switch
mode
Efficiency
>90% typical
Input voltage
100v / 115v / 230v n/-10%
Mains fuse
External
Fuse type
T10AT
Other features
Automatic soft start
Enclosure
100 litre internally braced 15mm (0.62”)
birch plywood enclosure
Finish
Textured black or white paint with
custom colours on request
Connectors
1 x female XLR (input)
1 male XLR (link)
1 x Neutrik Powercon
Controls &
Level control
Indicators
Power LED (Blue)
Signal LED (Green)
Limit LED (Red)
Full range / High pass switch (110Hz)
Power switch
Fittings
8 x M10 flying inserts
2 x recessed carry handles
Blanking plate for optional VTH pole
mount
4 x Rubber feet
Dimensions
665 x 440 x 440mm
H x W x D
26.18 x 17.32 x 17.32”
NET Weight
30kg
(66lbs)
Electronics
Maximum signal input for clip
Input attenuator at minimum: +18dBu
Input attenuator at maximum: +5dBu
Output noise
-105dB unweighted, referenced to
maximum output (22kHz bandwidth)
Efficiency
>90% typically
Damping Factor
400 ref 8 Ohms
Distortion
<0.05% @ 1kHz -3dB output
(22kHz bandwidth)
Input Impedance
5.6kOhms unbalanced
11.2kOhms balanced
Protection systems Over Current Excessive over current causes shutdown
Temperature Limiters applied
Brownout
Automatic protection and recovery
Mains
Inrush current limiting
Indicators
1x Limit LED
1x Signal LED
1x Power LED
Number of channels
One
System Type
Class D
System
POWERV
S
15 BP
Construction
8001 4310
POWERV
S
15 BP
Black
1
8001 4311
POWERV
S
15 BP
White
1
PART NUMBER
PACKED QUANTITY
COLOUR
MODEL NAME
Ordering Information
Notes:
(1) Average over stated bandwidth. Measured at 1 metre on axis.
(2) Unweighted pink noise input, measured at 1 metre in an anechoic chamber
A full range of measurements, performance data, CLF and Ease™ Data can be
downloaded from www.tannoy.com
Full independent verification of published specifications carried out by NWAA Labs,
California can also be obtained from the downloads section of www.tannoy.com
Tannoy operates a policy of continuous research and development. The introduction
of new materials or manufacturing methods will always equal or exceed the
published specifications, which Tannoy reserves the right to alter without prior
notice. Please verify the latest specifications when dealing with critical applications.
