4. Installation Guide
CMS 3.0 Series Operation Manual rev 3.0.0
7
4.3. Flying using Eyebolts
WARNING:
As the legal requirements for flying change from country to country, please consult your local safety
standards office before installing any product. We also recommend that you thoroughly check any laws and
bylaws prior to commencing work.
The device can also be hung via 4 top-mounted eye bolts. Rear of back can has mounting points for both M10
and 3/8 UNC threaded eyebolts.
4.4. Flying using Screwed Rod
The design also caters for a single point central hang via M10 or 3/8 UNC screwed rod – made easy thanks to
the slotted mounting saddle on the top of the back-can. If required a safety wire can be attached to any of the
M10 flying points.
To fit the back can to threaded rod support, first run a nut 50 mm (2”) up the rod followed by two plain washers
and then a locking nut (Nyloc®). Hook the back can on to the rod between the two plain washers. Once the nut
has cleared the guide slot the top nut can be locked down to secure.
