Tannoy AMS Series, Руководство по эксплуатации

Страница: 20 / 28

8. Technical Specifications
20
AMS Series Operation Manual rev 1.1.0
AMS 6DC Model
Ordering Information
Part Number Colour
8001 7970 Black
8001 7971 White
Performance
System AMS 6DC
Frequency response (-3 dB) (1) 75 Hz - 30 kHz
Frequency range (-10 dB) (1) 55 Hz - 40 kHz
System sensitivity (1 W @ 1m)
(2)
89 dB (1 W = 4 V for 16 ohms)
Nominal Coverage Angle 90 degrees conical
Power Handling
(3)
Average 80 W
Programme 160 W
Peak 320 W
Recommended Amplifier Power 160 W @ 16 ohms
Nominal Impedance (Lo, Z) 16 ohms
Rated maximum SPL
Average 108 dB
Peak 114 dB
Transformer Taps (via front rotary switch)
70 V 60 W / 30 W / 15 W / 7.5 W / OFF & Low impedance operation
100 V 60 W / 30 W / 15 W / OFF & Low impedance operation
Transducers
Dual Concentric™ point source driver 1x 165 mm (6.50”) Dual Concentric™ driver, using Omnimagnet technology
Low Frequency 44 mm (1.75” ) voice coil, treated multi fibre paper pulp cone
High Frequency 25 mm (1.00”) PEI dome
Physical
Enclosure ABS
Grille Steel, plated and painted
Connectors Removable locking connector with screw terminals
Transformer setting Rotary switch
Dimensions (H x W x D) 364.8 x 230.0 x 268.8 mm,
(14.36 x 9.05 x 10.58”)
Net Weight (ea) 6.08 kg (13.40 lbs)
Shipped weight 6.76 kg (14.90 lbs)
Included Accessories Yoke bracket
Packed Quantity 2
Notes:
1.
Average over stated bandwidth. Measured in
an IEC baffle in an Anechoic Chamber
2. Unweighted pink noise input, measured at
1 metre on axis
3. Long term power handling capacity as defined
in EIA - 426B test
A full range of measurements, performance
data, CLF and Ease™ Data for AMS 6DC can be
downloaded from www.tannoypro.com.
Tannoy operates a policy of continuous research
and development. The introduction of new materials
or manufacturing methods will always equal or
exceed the publishing specifications, which Tannoy
reserves the right to alter without prior notice. Please
verify the latest specifications when dealing with
critical applications.
Copyright (c) 2015 Tannoy Limited. All rights reserved.
UL-1480