Setting the WBGT Alert Temperature
8
1.When in the normal display, press and hold the
ON/OFF button ( ) and MODE button ( )
together for 2 seconds.
If the temperature exceeds the alert setting temperature, the alert alarm (beep
beep beep) sounds for approximately 15 seconds.
The alert alarm sounds when the WBGT alarm setting temperature is exceeded
for every 10 minute interval when the power is ON.
*The alert temperature settings are only enabled for the WBGT values.
2.Press the MODE button ( ) once to increase the alert temperature in 1℉ (1℃)
steps.
・
The alert temperature can be set within the range of “64℉ to 104℉” (18℃ to 40℃).
・
Press and hold the button to increase the steps quickly.
→
The initial setting value for the alert temperature
“76℉” (25℃) flashes.
→
Press the MODE button ( ) or ON/OFF
button ( ) to stop the alert alarm.
3.Press the ON/OFF button ( ) to enter the alert
temperature, and the display returns to the previous
screen.
・
If there are no buttons pressed for 5 seconds,
the alarm temperature returns to the previous
display before the setting was changed, even if
the ON/OFF ( ) button is not pressed.
