How
to
u
se
(Operating
Instructions)
How
to
u
se
(Operating
Instructions)
GB
GB
28
29
12
Press .
Enter / Next
13
Under measurement of the body
composition.
display goes off sequentially.
14
Measurement completion
The measurement result and the body fat percentage
evaluation are displayed.
It is automatically printed out. (In the case that other
than 0 is set in the “Setting the number of sheets to
print” (
page 13).
• Fat % Healthy range is not displayed if OFF is set
in the “setting ON or OFF of the Fat % Healthy
range display” (
page 15).
Note
Step off the platform.
It returns to the “measurement start” screen.
s
How to read the display <kg mode>
Judgment result
based on the body fat
percentage.
(
page 38.)
How to read the display <st.lb mode>
Judgment result
based on the body fat
percentage.
(
page 38.)
9
Input the age.
Input it by pressing
–
.
• The age can be input from 5 – 99.
• If it is mistakenly input,
e
press
(the input is deleted).
• If
is pressed in the state that the age is not
input, it returns to the “gender selection” screen.
CE
CE
Note
9
0
10
Press .
When the age is input, the lamp flashes on the
“Height”.
Enter / Next
11
Input the height.
Input it by pressing
–
.
• The height can be input from 90.0 - 249.9 (90 - 249)
or 3 ft -7 ft 11.5 in.
*0.1cm (1cm) / 0. 5in increments
*Unit is changed by
key.
• If it is mistakenly input,
e
press
(the input is deleted).
• If
is pressed in the state that the height is not input, it returns to the “age selection” screen.
CE
CE
Note
9
0
Operating Instructions
when using as a body
composition analyzer(continued)
