10
5. Measuring Your Body Composition
Check “0.00kg” (0.0lb, 0.0stlb) is shown on the display, then step on the monitor.
Registered personal data and the measurement results are displayed in order, then the
power switches off automatically.
Note:
If you step onto the monitor before 0.00kg is displayed, "Err,-OL" is displayed and the power
turns off. Set the personal information again.
Also, if you do not step onto the monitor within 60 seconds of “0.00kg”(0.0lb, 0.0stlb) appearing,
the power turns off automatically. In this case, you need to set and store personal data again.
Note:
The monitor needs to be connected to the smartphone in order to use the dedicated app.
Connect to the smartphone, and register the Body Composition Monitor as shown in the instructions on P.7.
Setting and Storing Personal Data in the Memory
If you change the birthday and/or gender, “CLr” is displayed on the monitor.
If you select “no” using the
buttons and then press button, no new data is saved
(existing data is left unchanged) and power turns off.
Select “YES” using the
buttons and then press the button, to delete the existing personal
data enabling you to register new data.
en
11
Taking Measurements
If you do not have your smartphone when taking measurements
1.
When the monitor power is off, select "+" in the app and
then follow the instructions in the app.
When “0.00kg” (0.0lb, 0.0stlb) is displayed, step onto the monitor.
2.
Measurement data is automatically sent to the smartphone.
If there is unsent data stored on the monitor, that data is also sent to the smartphone.
Simply step onto the monitor. The auto-recognition feature will automatically recall your personal
data. Your monitor will store up to 10 sets of measurements.
Saved data is sent to the smartphone together with new measurements the next time
the smartphone is connected to the monitor when taking measurements.
en