2
Digital Scale Instruction Manual
Read this Instruction Manual carefully and keep it for future reference.
◆
Battery placement
◆
Hook Hanger
◆
Inserting photographs or patterns etc.
This scale can be hung on a hook for convenience.
When not using the
hook hanger, press it
into the scale until it
clicks for storage.
Unlock the lock.
Insert 2דAAA” “R03” or “24F”
batteries as indicated.
Push ON/TARE.
Remove the clear
cover.
Place the photograph
or pattern on the tray
in line with the guides
(points).
Place a bowl on
the tray.
Align the clear cover
with the bottom of the
tray, and gently place
the clear cover back
on the tray.
Push ON/TARE to
subtract the weight of
the bowl.
Lock the lock.
Place the material to
be weighed.
After removing the bowl, the display will show a
negative reading or “----”. Press the ON/TARE button
to return the display to “0”. Push OFF to turn off.
Do not hang the scale in a location where it can swing, drop easily, or in an
otherwise unstable place. Doing so may damage the scale or cause injury due to
the scale colliding with another object or dropping from the hook. Also, do not
use a suction pad hook, double-sided tape hook, or weak magnet hook. Such
hooks may not be able to support the weight of the scale, causing it to fall.
<front>
<back>
A
B
C
D
E
F
G
H
I
click
click
oz
g
oz
g
g version
oz
g
oz version
oz
g
oz
g
oz
g
oz
g
oz
g
◆
Weighing
If the weight of the item(s) exceeds the scale’s capacity, “EEEE” will appear on the display. Make sure you place item(s) in
the center of the tray.
◆
Mode change
◆
Automatic power off
◆
Battery replacement
Push ON/TARE. When a mode change is required, press ON/TARE and OFF buttons simultaneously, and then
select the proper mode. (for the g/oz version)
The scale is designed with an auto power-off function for energy efficiency. If the same reading is displayed for
more than 10 minutes the scale will automatically turn off.
If “Lo” appears in the display when attempting to weigh, replace the battery. (following previous instructions)
Double-sided tape can be used to hold the
photograph or pattern in place.
To cover the entire surface of the tray with a
photograph or pattern, cut the photograph or
pattern to the same size as the paper that was
included with the scale. (max. 5 in × 4.7 in)
A
Lock
B
Clear cover
C
Tray
D
OFF button
E
Display
F
ON/TARE button
G
Hook hanger
H
Battery compartment
I
Lid (Battery compartment)
Name of parts
How to use
