13
If the following problems occur ...then...
Symptom
Check This
Remedy
appears on the display, or all
the data appears and immediately
disappears.
Batteries are low.
When this message appears, be sure to replace the
batteries immediately, since weak batteries will affect
the accuracy of your measurements. Change all the
batteries at the same time with new batteries.
Note: Your settings will not be erased from the
memory when you remove the batteries.
appears while measuring.
The unit cannot accurately measure
your weight if it detects movement.
The Body Fat Percentage is more than
75%, readings cannot be obtained
from the unit.
Please stand on the platform keeping movement to a
minimum.
The Body Fat Percentage reading
does not appear after the weight is
measured.
Make sure socks or stockings are removed, and the
soles of your feet are clean and properly aligned with
the guides on the measuring platform.
appears while measuring.
Reading cannot be obtained if the
weight capacity is exceeded.
Registration was not done in the
server.
Register personal information at the web site.
Connection error in the server
Try connecting once again after a while
Wi-Fi setup is not complete.
Set up the Router connection through WPS or manual
settings from PC.
–
,
–
,
Communication error
1. Check the Router settings.
2. Restart the Router.
3. Place the Router so that the Body Composition
Monitor is near by.
TROUBLESHOOTING