Tanita DC-240MA, Инструкция по эксплуатации, Страница: 10 / 24

Preparation
10
<Using batteries>
<Using the AC adapter>
(1) Insert the AC adapter jack into the AC
adapter inlet on the right side of the
main unit.
(2) Plug the AC adapter into the power
outlet.
• This product must be used with the
designated AC adapter (model: ATM012T-W090V)
• Please change the batteries LR6 (AA) careful-
ly to avoid dropping them on your feet.
• Ensure that the batteries are inserted with
the correct polarity / . If the polarity is
incorrect, then the batteries may leak and
damage the product.
• When not in use for a long time, remove the
batteries before storing the product.
• Please observe the following instructions
for accurate measurement. Measurement
may not be possible on the unstable
environment. During weight
measurement, please don’t touch any
connecting cable such as an AC Adapter
cable and PC communication cable to
avoid causing unstable scale installation.
Before use
(Preparation)
en
Required
Prohibited
• Do not use old batteries together with new
batteries, or a mix of different types of batter-
ies at the same time.
• Do not replace with wet hands. Do not allow
water to contact or spill on the battery box.
•
Lo
is displayed when battery power is
running out.
Promptly replace with six new batteries.
Required