Tanita BF-562, Инструкция по эксплуатации, Страница: 7 / 14

GB GB
Then “ooooo” will appear in
succession.
Until the “Body fat
percentage” is displayed on
the digital display, move as
little as possible and
stand
straight.
Measurement is finished.
“Body weight” and the “Body
fat percentage” will be
displayed for about
3 seconds.
(Two short beeps will sound.)
The measurement will be
automatically recorded.
* If “NOT RECORDED” is
displayed, please measure
yourself again within
one
minute . (For details, please
refer to page 18.)
The BMI figure is displayed.
Note: When measured in the
athlete-mode, the BMI figure
will not be displayed.
2 Start measurement.
Your body weight will be
displayed.
(A short beep will sound.)
15
Graphs are displayed and
then the unit will switch
off.
Use
After kg is displayed, 0.0
be sure to stand on the
weighing platform barefoot
so that your heels touch the
center of the electrodes.
Step on the scale platform
berefoot.
The measurement range of the body fat percentage is
between 1.0% and 75.0%.
If the details are not stored in the memory...
e
Please refer to “Guest Mode:Measuring without pre-
set data” on page 20.
In order to save power, the power will be
automatically switched off after use. (The display
disappears.) This function also works in the
following cases.
When the button operations are stopped.
Although it depends on the operation concerned, the
power will be switched off after about 20 to 30 seconds
When about 30 seconds have passed without
you stepping on the scale platform after
“0.0” kg is displayed.
When you stepped off the scale platform
during the measurement.
When about 30 seconds have passed since
the graph was displayed.
Automatic Power Off Function
GB GB
Memory key
(for five individuals)
Personal
If the display box and the scale platform are not
firmly connected.
e " ERROR " will be displayed and you cannot measure
yourself.
If the soles of your feet are not clean or you are not
standing on the scale platform correctly,
e “ ----- " will be displayed and you may not be able to
measure yourself.
If the body fat percentage exceeds the range of
measurement,
e
“ ---- " will be displayed and you cannot measure
yourself.
If you step on the scale platform before kg is
displayed,
e
Displays such as
,
or
, may
appear or the power will be switched off during
measurement.
-OL -1.1 ERROR
0.0
Measure barefoot with clean, dry feet.
Stand up with your knees straight.
Ensure the insides of your thighs are not touching.
Place your heels correctly on the electrodes.
Remarks
When your data is
memorised with “3”.
1 Press your “Personal”
Memory Key.
14
How to Measure
(For Pre-set data)
Have you memorised your personal details?
Display
Front
electrode
Heel
electrode
First, the calendar is
displayed.
(A short beep will sound.)
Next, your date of
birth, height, gender
and the “Personal”
Memory Key are
displayed.
The display changes to
kg.
0.0
Points to Note
BF-562海外GB+D面付解除 ページ15