
1.
2.
3.
1.
2.
3.
4.
Note: Do not step off until “oooo” disappears.
Note:
If you step onto the scale before appears the display will show and you will not obtain readings.
Programming the Guest Mode
16
Press the OFF button. Step onto the scale after is shown on the display. The body weight value will appear.
The display will light for about 20 seconds, and then the power will automatically turn off.
Taking Weight Measurement Only
Guest mode allows you to program the unit for a one-time use without reading a personal data
number.
Press the button to activate the unit. Press the
or button to select . Press the SET button.
Then follow the steps: Set the age, gender (male/female/male athlete/female athlete) and height.
Step onto the scale after is shown on the display. Your weight will be shown first, continue
standing on the scale until the body fat % reading is shown on the display. The reading will be
shown for 40 seconds.
When the power is off, press the SET button.
Press the
or button to select a personal data number (1, 2, 3, 4 and 5). Once you reach the
personal data number you wish to use, press the SET button. The unit will beep once to confirm.
Follow the steps as listed on P.12 to change your personal data.
Changing Personal Data
Note:
If you change the birthday and/or gender, the unit will show .
If you select using the
or button and pressing the SET button to confirm,
the existing personal data will be deleted.
If you select using the
or button and pressing the SET button to confirm, no
new data will be saved (existing data will be unchanged) then the unit will shut off.
Erasing Personal Data
When the power is off, press and hold the SET button.
Press the
or button to select a personal data number (1, 2, 3, 4 and 5). Once you reach
the personal data number you wish to use, press the SET button for more than 3 seconds. The
unit will beep once to confirm. is displayed.
Select using the
or button.
Press the SET button.