Tanita AM-120E, Инструкция по эксплуатации

Страница: 29 / 216

29
Eng Resetting the System
In the following situations, reset the system.
If you want all of personal settings and measurement values in the memory to be reset to [0].
Note: If you reset the system, you cannot restore any of the values or initial settings.
1) Press and hold the SET button for
more than 2 seconds while today’s
values are shown in the display.
The display switches to the setting
display, and the [Hour] in the time
display flashes.
2) Press and hold the CLEAR button
for more than 5 seconds, and [Clr]
and [No] are displayed.
3) Press the memory/ MODE
button to change the display to
[Yes].
4) Press the SET button to complete
the system reset.
Note: The display screen switches to the setting screen after system reset. Refer to page 11,
and reset the initial settings.
Note: If you do not wish to reset the system, select [No] and press the SET button. The
display screen returns to the setting screen.