
Allspeeds Document - Tangye Hydralite Manual
Page 4 of 27
Rev 1. Issue 1. Date: 01/07/2021
2
Technical Data
2.1
Jack Weights
Important
: Ensure the correct Manual Handling procedures
are carried out when handling the jacks. Where a jack has a
claw attachment, the claw should be removed from the jack
and lifted separately.
The weight of the jack is marked on the nameplate affixed to
the jack base. All jacks have lifting handles and these should
be used during transportation. Larger jacks may need to be
moved by two people.
2.2
Oil Requirements
The Hydralite range of hydraulic jacks contain nitrile seals and
should only be used with good quality hydraulic oil (e.g. Shell
Tellus 32). For compatibility with any other fluid, please
contact the manufacturer.
2.3
Environmental Considerations
The jack is intended for use in industrial environments, inside
or outside, between temperatures of
–
20 to +50°C. The jack
should not be used outside these limits or in explosive
atmospheres/areas of nuclear radiation.
2.4
Noise and Vibration
By its design, the jack operates slowly under manual effort.
There is no noticeable noise or vibration. The noise level does
not exceed 70 dB(A).
Содержание PS620
Страница 5: ...3 Declaration of Conformity...