Tango Wash 575
®
User’s Manual
5
CONTROL PANEL
MENU NAVIGATION
The DMX address is displayed after the fixture resets. To enter the menu, press [mode]. Use the [up] and
[down] keys to select an option.
SETTING THE DMX MODE
1. Apply power to the Tango Wash 575. Press [mode] to enter the Addr mode.
2. Select a DMX starting address by using the [up] and [down] keys.
3. Store the DMX starting address by pressing the [mode].
MOVEMENT
The Tango Wash 575 provides 2 menus with options for optimizing movement to suit different
applications.
(PAN->YES) allows you to reverse pan movement.
(Tilt->YES) allows you to reverse tilt movement.
RESET
The Tango Wash 575 can be reset without switching off the power supply (RSET).
1. Press [mode] to enter the (rSEt) mode.
2. Press [up] or [down] key to reset the fixture.
OPERATING MODES
The Tango Wash 575 can run in 3 modes: DMX, sound activation and auto. The fixtures can run in
master/slave mode with sound activation.
To activate sound trigger, press [mode] to enter (RUN), then press [up] or [down] key to select (PRG0).
To run the built-in sequences, press [mode] to enter (RUN), then press [up] or [down] key to select
(PRG1).
To set a fixture run as a slave unit, press [mode] to enter (RUN), then press [up] or [down] key to select
(FOLL).
