Tangent MCS-650 Скачать руководство пользователя страница 5

IMPORTANT SAFETY INSTRUCTIONS 

 
WARNING: IT IS IMPORTANT THAT YOU READ AND OBSERVE BOTH THE INSTRUCTIONS IN THIS 

MANUAL AND THE INSTRUCTIONS ON THE UNIT. KEEP THIS MANUAL FOR FUTURE REFERENCE. 
This unit was designed and manufactured with a view to providing maximum safety for the user. Incorrect use 

of the unit may cause electrical shock or fire. The protection devices built into this unit will protect the user if 
the procedures below are observed in connection with installation, use and repair. This unit is fully electronic 

and contains no parts that can be repaired by the user. 
DO NOT REMOVE THE CABINET. RISK OF DANGEROUS VOLTAGE. ONLY QUALIFIED TECHNICIANS 

ARE ALLOWED TO REPAIR THE UNIT. 
 

Read the manual 

Upon unpacking the unit, please read the manual carefully and observe all the instructions given. 

 

Power supply 

Only the power supply indicated on the rating plate must be used for this unit. If you are not sure which power 
supply you have, please contact the distributor or the local electricity supplier. 

 

Earthing or polarization 

If the plug cannot be inserted properly into the socket, or if the plug does not fit, the unit must not be used in 

your country. 
 

Ventilation 

The cabinet is provided with slots and openings to ensure ventilation and reliable operation and to protect the 

unit against overheating. Do not block or cover these openings. The openings must never be blocked, for 
instance by placing the unit on a bed, a sofa, a carpet or similar surface. 

 

Heat 

Do not place the unit near sources of heat such as radiators, heat registers, ovens or other units that produce 
heat. 

 

Water and moisture 

The unit must not be placed close to water, such as bathtub, wash basin, kitchen sink or laundry tub, in a 
damp cellar or close to a swimming pool, etc. 

 

Cleaning 

Unplug the unit before cleaning. Do not use liquid detergents and aerosol cleaning agents. Use a dry cloth. 
 

Power cords 

Wiring must be organized to prevent people from stepping on the cables and to avoid pinching by objects 

placed on or beside them. Take special care around sockets and plug boxes and where the power cords leave 
the unit. 

 

Overloading 

Make sure that wall sockets, extension cords and plug boxes are not overloaded as this may lead to fire or 
electrical shock. 

Содержание MCS-650





































Отзывы: