Tangent EXEO AMP, Руководство пользователя, Страница: 15 / 16

13
TROUBLESHOOTING
PROBLEM CAUSE/REMEDY
No power when the unit is turn on - Switch on the current at the mains outlet socket
- Check that the plug has been correctly inserted in the socket
- The internal fuse has blown and must be replaced by a qualified service technician
- The power cord has been damaged and must replaced
No Sound - The unit has not been turned on
- The volume control is set at minimum or muted
- The speaker cables have not been correctly connected
- A wrong input source has been selected
- Input source has been connected
- Speaker setting is set to off
There is sound in one channel only - The balance control is not correctly adjusted
- The audio input cables have been incorrectly connected or damaged
- The input source is defective
- The speaker cable have been incorrectly connected or damaged
- The speaker is defective
High buzzing - The audio input cables have been incorrectly connected or damaged
- The ground cable for the record player has not been connected
- The turn table pick-up is defective
Weak bass and poor stereo perspective - The speaker connection is out of phase. Check that the positive
and negative poles have been correctly connected, both at the back of
the amplifier and at the back of the speaker
Distortion of sound - Bass and treble control are too high in relation to speaker specifications
- The volume is set too high
The display does not display any
information
- The amplifier is defective and should be serviced by a qualified technician
- Time out for the display is chosen in the menu
The unit does not switch between inputs - The amplifier is defective and should be serviced by a qualified technician
“ERROR” is displayed on the display - The amplifier is defective and should be serviced by a qualified technician