1. Remove no.
7
, then using
no.
8
, loosen set screw and
lift off no.
6
.
2. Adjust no.
10
to desired
position per below.
Normal factory
set position
allows full mix-
ing of hot and
cold water.
Using needle
nose pliers, care-
fully lift off the
temperature limit
stop ring from the
cartridge body.
Re-set the ring
onto the body per
Figure 4 or 5.
Place ring into
this position
to reduce the
amount of hot
water available.
Result: cold
to warm water
only.
Place ring into
this position
to reduce the
amount of cold
water available.
Result: warm to
hot water only.
Figure 1
Figure 2
Figure 3
Figure 5
Figure 4
7
General Instructions
