STEP A:
1. Remove indexes, screws, and handles from cabinet.
2. Remove slip
fl
anges by loosening the set screw (do not
remove from
fl
ange).
3. Un-tape VR Bit from top of cabinet and unscrew the (6)
door screws and remove door.
VR BIT
FOR RECESSED MOUNT MODELS:
1. Complete rough-in so mixing valve will be 56” from
fl
oor.
2. Punchout oval side wall tabs (2 per side).
3. Use the side oval holes and screw cabinet into appropriate
supports with appropriate fasteners.
4. Finish assembly of 0RK-SK & hose reel.
5. Connect inlet supplies and check for leaks.
6. Reverse
STEP A
to re-assemble.
ENLARGED VIEW
FOR SURFACE MOUNT MODELS:
1. Place cabinet so mixing valve is 56” from
fl
oor.
2. Using 6 of the 8 holes, use appropriate fasteners &
washers to mount to wall. Two of the middle set of
holes will be blocked depending on bottom or top inlet
supplies.
3. Finish assembly of 0RK-SK & hose reel.
4. Connect inlet supplies and check for leaks.
5. Reverse
STEP A
. to re-assemble.
BACK
FRONT
HOLES
HOLES
(hidden)
