30
31
TR-0206 Stainless Protection Sensor
Cable Length : 0.6m
Thermal-Constant Time :
In the air : Approx. 75 Sec.
TR-0306 Stainless Protection Sensor
Cable Length : 0.6m
Thermal-Constant Time:
In agitated water : Approx 18 Sec.
※
Only stainless section is water resistant
TR-0406 Stainless Protection Sensor
Cable Length : 0.6m
Thermal-Constant Time :
In agitated water : Approx 20 Sec.
※
Only stainless section is water resistant
TR-0506 Stainless Protection Sensor
Cable Length : 0.6m
Thermal-Constant Time :
In agitated water : Approx 20 Sec.
※
Only stainless section is water resistant
TR-0706 Stainless Protection Sensor
Cable Length : 0.6m
Thermal-Constant Time :
In agitated water : Approx 18 Sec.
※
Only stainless section is water resistant
Materials:
①
Thermistor
②
TPE resin-shielded sensor
③
TPE resin-shielded wire
④
M3Screw Hole
⑤
Compacion Tube
⑥
Stainless pipe
(
SUS304
)
⑦
Stainless pipe
(
SUS316
)
Possible Measurement Range :
-
40 to 110
℃
Sensor Temperature Durability:
-
50 to 115
℃
Measurement Accuracy : Average ±0.3
℃
(-
20 to 80
℃
)
・
Average ±0.5
℃
(-
40 to
-
20
℃
/
80 to
110
℃
)
Sensor Extension Cable
（
Temp Sensor Only
）
unit : millimeters
TR-1C30
Cable length : 3.0m
Materials:
①
Vinyl Coated Electrical Wire
Note:
- Only one cable per sensor. When using the extension cable there will be
a +0.3
℃
at normal temperature and at -50
℃
a gap of +0.5
℃
may occur.
- If a sensor extension cable is being used with the data logger connected
by USB to your computer, electromagnetic waves may cause large errors
in measurements.
- Do not use the Extension Cable with TR-72U.
Temp / Humidity Sensors
（
For TR-72U
）
TR-3100 Temp / Humidity Sensor
TR-3110 Temp / Humidity Sensor
Cable length : 1m
Materials:
①
Temperture/humidity sensor
②
Polypropylene resin
③
Vinyl Coated Electrical Wire
Possible temperature measurement range :
0 to 55
℃
Possible humidity measurement range :
10 to 95% RH
Sensor temperatur resistance :
-
10 to 55
℃
humidity measurement accuracy :
±
5
％
RH
（
At 25
℃
50
％
RH
）
Service life :
1 year (under normal operational conditions)
Operational conditions : Without dew condensation, water leakage or effect from
corrosive gas or organic solvents.
Note:
An Extension Cable cannot be used with Temperature/Humidity
Sensors.
