Tando TR-71S Скачать руководство пользователя страница 8

3

  Continuing to use the unit with the [BAT] mark displayed and without 

changing the batteries will cause the display to change to [SLP] and the 
unit will enter sleep.  Please change the batteries immediately.

  Recording stops and the recorded data and recording conditions are 

stored in the main unit.

  Downloading data is only possible if you change the batteries.

  To start recording again after replacing the batteries you must reset 

the Start Recording settings.

  While replacing the batteries the main unit will continue to function 

for up to 1 hour without batteries.

  From the time the unit enters sleep mode until battery power is 

totally lost is about 1 year.

4

  If left in sleep mode, the battery power will be lost and the display will turn 

off.

 Recorded data and recording conditions will be lost from the main 

unit.

 To start recording again after replacing the batteries you must reset 

the Start Recording and Recording Conditions settings.

13

Battery Life

1

 

Approximate time till [BAT] mark appears on the LCD display after 
installing a new set of batteries is as follows:

- Recording interval of 2 sec. or longer 

Approx. 10 months

- Recording interval of 1 sec. 

Approx. 6 months

2

 

When the battery power becomes low, the [BAT] mark will appear on the 
LCD display on the main unit. Once the [BAT] mark appears, you should 
replace the batteries as soon as possible.

 Recording will continue and the recorded data and recording 

conditions will be stored in the main unit. You can still download the 
data to your computer.

 Recording will continue while you replace the batteries.

 The main unit will remain operating without batteries during 

replacement for up to 3 minutes.

 Continuing to use the unit without changing the batteries will cause it 

to go into sleep mode. From the time the [BAT] mark appears to the 
time the unit will go into sleep mode is roughly as below. Please 
change the batteries before the unit goes into the sleep mode.

- Recording interval of 2 sec. or longer 

Approx. 3 months

- Recording interval of 1 sec 

Approx. 2 months

14

Содержание TR-71S
















Отзывы: