RETROFIT INSTALLATION GUIDE
Page 3
US LED | 6807 PORTWEST DR | HOUSTON, TX 77024 | T 866 972 9191 | F 713 972 9393 | [email protected] | www.usled.com
Updated 05.19.11
RETROFIT COMPONENTS
Tandem 4-foot unit (Figure 1)
G1-14-24-4W: Single Sided, 4-foot Tandem unit
G2-14-24-4W: Double Sided, 4-foot Tandem unit
Tandem Rail Clip (Figure 2)
Tandem Mounting Brackets (Figure 3)
Quick Connect Jumper Wires (Figure 4):
RLSW-12: Pair of 12” Quick Connect Jumper Wires
RLSW-24: Pair of 24” Quick Connect Jumper Wires
RLSW-36: Pair of 36” Quick Connect Jumper Wires
Class 2 Power Supply, 24VDC (Figure 5):
PSA-24-80: Advance model number LED120A0024V33F, 24VDC, 80W power supply
PSA-24-100: Advance model number LEDINTA0024V41FO, 24VDC, 100W power supply
#8 self drilling screws (Figure 6)
Wire nuts (Figure 7)
REQUIRED TOOLS
Drill
.125” (1/8”) drill bit
.250” (1/4”) nut driver
Saw for cutting aluminum
Wire cutter
Figure 5: Power Supply
Figure 6: Screws
Figure 7: Wire Nuts
Figure 4: Quick Connect Jumper Wires
Figure 3: Mounting Bracket
Figure 2: Rail Clip
Figure 1: Tandem 4-foot unit
Module
Jumper Tab
Wire Cover
