35
Network Initialization Settings
To connect a TR-7W to a network, it is necessary to make the correct IP Address and
Subnet Mask settings appropriate to your network environment.
NOTE :
- To make IP address changes, connect one TR-7W unit at a time and carry out the changes. Please note
that upon purchase, all TR-7W units are set with the same IP address. Do not connect more than one
unit with the same address to the network at the same time.
1.
It is necessary to connect to the same network as to which the
computer you have opened this application (TR-7W Settings
Utility) is connected to.
2.
In "TR-7W Settings Utility", click on the "Network Initialization"
Tab and then click on the [Search] button. After clicking, the
search results will be shown in about 5 seconds.
The factory default settings for TR-7W are as follows: IP Address : "192.168.1.200",
Subnet Mask : "255.255.0.0".
The MAC address is written on a sticker on the back of the TR-7W logger.
[Change Settings]
button
[Search]
button
Connected
TR-7W Loggers
