7
Registering a Base Unit to
T&D WebStorage Service
The Base Unit collects and sends the Remote Unit’s recorded data to T&D WebStorage
Service automatically when it is set as the destination (default). To check the transmit-
ted data, the Base Unit needs to be registered to T&D WebStorage Service.
.1
Open your browser and log in to T&D WebStorage Service.
https://webstorage-service.com
*
If you have not already registered as a User, use the above URL and carry out a New User Registration.
.1
From the screen’s left-side menu, open [Device Settings].
.1
In the upper right of the screen, click on [ Device].
.1
Enter the serial number and registration code for the RTR500BW, then click [Add].
•The serial number and registration code can be found on the supplied Registration Code Label as shown above.
•If you have lost or misplaced the Registration Code Label, you can check it by connecting the Base Unit to your
computer via USB and selecting [Settings Table] - [Base Unit Settings] in the
RTR500BW Settings Utility
.
•There is no need to register the RTR-600 Series.
•When registration is complete, the registered device will be displayed in a list on the [Device Settings] screen, and it
will be shown to be in waiting for its first communication.
